orbitafutura_motifs01-01_V2_final_20-04-19-01.png
 

MATERIAL

 
orbitafutura_motifs01_V2_final_20-04-19-01.png
 
 
 

It is possible to cut and engrave various surfaces and materials. The list below will give you all the information you need to know about the selection of materials that can be safely cut and engraved with CO2 laser cutters.


 

Available materials *

Reach out to learn more about the materials in stock.

Plastic

- Cast Acrylic (colored/opaque / translucent/frosted - P95/DP9 / 2 tones/matte / glossy finish)
(April 2024 update: 1/8 and 1/4 translucent blue acrylic #2424, 1/8 + 1/4 P95 cast acrylic, 1/8 and 1/4 white cast acrylic #7328, 1/8 and 1/4 Black cast acrylic, 1/8 translucent neon green, 1/8 orange in stock)

- (NEW)
Cast acrylic pastel colours (February 2024 update: 1/8 lilac acrylic, 1/8 mint acrylic, 1/8 translucent aqua acrylic in stock)

- Extruded acrylic (not recommended for etching)
(April 2024 update: 1/8 Opaque white in stock, 1/4 Fume acrylic)

- Clear acrylic cast or extruded (in stock at all times: 1/16, 1/8, 3/16 and 1/4)

- Mirror Acrylic (several options available) (April 2024 update: 1/8 standard silver mirror acrylic, 1/8 gold Mirror acrylic in stock)

- Textured / Glitter acrylic (several options available)

- Two tones (colours) acrylic (several options available) (April 2024 update: 1/16 brushed stainless steel/ black finish in stock)

- (NEW) Black ABS-haircell (April 2024 update: 1/8 thickness in stock)

- PET-G (sheet or film) (April 2024 update: 0.020 / 0.030 / 0.040 / 0.060 / 0.080 Thicknesses in stock)

- Polyester (film or sheet in clear, metalized, translucent, various thicknesses)
(April 2024 update: metalized polyester film 0.005 in thickness and translucent sheets in stock)

- Mylar (Frosted white 250 microns / 190 microns sheets) (April 2024 update: frosted off-white 250 microns / 190 microns sheets)

- Coroplast (Black, white, coloured)

- (New) Delrin (April 2024 update: Black Delrin 1/16 thickness)

- styrene (several options available)

- Polypropylene (several options available)

Wood

- Russian birch plywood (in stock at all times: 1/8 and 1/4) 

- Veneer (Teak, Birch, etc) (April 2024 update: teak and birch wood veneer)

- Solid woods (Cherry wood, maple, Red & white oak, Walnut, etc.) (April 2024: 1/4 American cherry wood, maple, White oak, Walnut)

- Bamboo (plywood or veneer / in 1/8 or 1/4 thicknesses)

- MDF/ Fibrex (In stock at all times: 1/8 + 1/4 thicknesses)


Rubber

- Silicone rubber

- Delrin rubber

- Laserable stamp rubber (April 2024 update: 1/8 thickness in stock)

- Latex (natural latex, other colours available) (April 2024 update: Translucent/ Natural Latex 0.25 mm in stock)


Foam

- Black and white EVA foam (various thicknesses) (April 2024 update: 2 mm / 5 mm / 8 mm / 10 mm Black & white Eva foam in stock)

- Gatorfoam various thicknesses)

- Black Neoprene foam (various thicknesses)

- Polyethylene Foam (various thicknesses)

- (New) polyurethane Foam (various thicknesses available)


Fabric

- Neoprene (Fabric)

- Scuba-neoprene / polyester & spandex spacer fabric (various colours) (April 2024 update: caramel, black, white, grey, blue, red scuba-neoprene in stock)

- Denim fabric (April 202424 update: dark blue and grey-blue colours)

- Cotton (Canvas, Duck, several options available)

- Polyester (spacer fabric, Oxford, and more) (April 2024 update: polyester Oxford black/white in stock)

- Alcantara

- Softshell (April 2024 update: black softshell fabric)

- Ripstop Nylon (several options available)

- Silk (fabric, raw silk sheet)

- Satin

- Mesh fabric (polyester/spandex spacer fabric, various colours) (April 2024 update: black stretch mesh + non-stretch mesh)

- Felt (100% wool felt, designer felt, synthetic felt)


Paper & Cardboard

- Colored Paper (several thicknesses, styles and colours available)
(February 2024 update: Fabriano Tiziano Paper (40-50% cotton) in white, black and grey-green)

- Metalized paper (sILVER OR GOLD Miri PAPER)

- Chipboard (natural brown, white laminate) (April 2024 update: 0.020 / 0.030 thicknesses)

- Cardboard (craft, Corrugated, b-flute, e-flute and black cardboard)
(April 2024 update: Peterboro medium grey 40pt - cellulose)

- Special paper stocks (Leather paper, Aquatic plants paper, green banana leaf paper)


Other materials

- Natural Cork

- Cork with Neoprene rubber (April 2024 update: natural and neoprene rubber + cork in stock)

- Magnetic sheet

- Laserable Foil sticker (Silver or gold)


(NEW) TOOLS and glue

- Weld-on acrylic cement (473 ml) (In stock at all times)

- Acrylic glue applicator (In stock at all times)


(NEW) Customizable objects/accessories

- Black metal tins to etch (in stock)



materials that can't be laser cut/engraved (sadly) *

Due to toxic fumes, high risk of fire and proper industrial equipment, certain materials can't be laser cut or engraved.

- PVC / vinyl / artificial leather (or any plastics that contain chlorine)

- polyurethane (medium-high density)

- Lexan

- Polycarbonate

- metals (engraving only)

- glass (Etching only)

- fibreglass

- coated carbon fibre

 

N.B. HEUREUSE DE RÉPONDRE À VOS DEMANDES EN FRANÇAIS.